Invacare 9XT Owners Manual - Page 91

12 OPTIONS 12.3 Installing the Wheel Lock Extension Handle ƽ WARNING If the wheelchair is equipped with push to lock wheel locks, elevating legrests, and wheel lock extension handles, the wheel lock extension handles MUST be removed before swinging the elevating legrests to the side, otherwise injury or damage may result. Interference between the top of the elevating legrest and the wheel lock extension handle causes the wheel lock to disengage.  For this procedure, refer to FIGURE 6 1. Remove the existing rubber tip from the wheel lock handle (Detail "A"). 2. Install the extension handle over the wheel lock handle (Detail "B"). Detail "A" Rubber Tip Detail "B" Wheel Lock Extension Handle Wheel Lock Handle Wheel Lock Handle Wheel Lock Part No. 1056953 Wheel Lock FIGURE 6 Installing the Wheel Lock Extension Handle 91 Invacare® 9000 Series Wheelchair