Invacare 9XT Owners Manual - Page 49
Converting Between Space Saver and Conventional Arms
View all Invacare 9XT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
6.4 Replacing Desk/Full Length Armrest Pad (Fixed Height Arms Only) 1. Remove the mounting screws that secure the armrest pad to the armrest assembly. 2. Replace armrest pad and securely tighten with the existing mounting screws. Mounting Screws 6 ARMS Armrest Pad Armrest Assembly 6.5 Replacing Clothing Guards (Fixed Height Arms Only) 1. Remove the four mounting screws that secure the existing clothing guard to the armrest assembly. 2. Install new clothing guard and securely tighten with the existing mounting screws. Clothing Guard Mounting Screws Mounting Screws FIGURE 4 Replacing Desk/Full Length Armrest Pad (Fixed Height Arms Only) 6.6 Converting Between Space Saver and Conventional Arms Space Saver arms DO NOT work with 9000XT/9000SL with the adjustable angle back option and 9000XT Recliner. 1. Remove the arms from the wheelchair. Refer to Removing or Replacing Armrest on page 48. 2. Remove the locknut and hex screw that secure the arm socket to the wheelchair frame. 3. Repeat STEP 2 for the opposite side of the wheelchair. 4. Reposition the arm socket to one of two positions: A. For conventional arms - position arm socket on outside of frame. B. For space saver arms - position arm socket on inside of frame. Make sure arm sockets sit flush against the wheelchair frame. 5. Reinstall the hex screw and locknut that secure the arm socket to the wheelchair frame and securely tighten. Part No. 1056953 49 Invacare® 9000 Series Wheelchair