Invacare 9XT Owners Manual - Page 52
Seat And Back
![]() |
View all Invacare 9XT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7 SEAT AND BACK 7.2 Replacing Back Upholstery Screw-On Back Upholstery This procedure applies to 9000 SL without adjustable back angle option. 1. Flip swing-back arms up and out of the way. Refer to Using Swing-Back Arms on page 47. 2. Remove the six mounting screws and washers that secure the existing back upholstery to the back canes. 3. Cut the tie wraps that secure the existing back upholstery to the wheelchair frame. 4. Securely tighten the new back upholstery to the back canes with the six mounting screws and washers starting with the top hole of the back cane. 5. Install two new tie wraps through the bottom holes of the upholstery to tie the bottom of the back upholstery to the back canes. 6. Flip swing-back arms down for use. Refer to Using Swing-Back Arms on page 47. Washers Mounting Screws Back Upholstery Back Cane Tie Wraps Washers Mounting Screws FIGURE 7.1 Replacing Back Upholstery - Screw-On Back Upholstery Slip-On Back Upholstery This procedure applies to 9000 XT/XDT and 9000 SL with adjustable back angle option. 1. Remove the two mounting screws and washers that secure the existing back upholstery to the back canes (Detail "A"). Invacare® 9000 Series Wheelchair 52 Part No. 1056953
![](/manual_guide/products/invacare-9xdt-owners-manual-20e8691/52.png)