Invacare IFX-20MP Owners Manual - Page 52
How to Disconnect the Mobility Device After Charging, 7.4.5 Storage and Maintenance
View all Invacare IFX-20MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Invacare® AVIVA™ FX 2. Connect the battery charger to the charger socket. The charger connector pins are identified in the following ways: l Pin 1 A - Battery Plus (+) l Pin 2 B - Battery (-) l Pin 3 C - Inhibit 3. Connect the battery charger to the power supply. 7.4.4 How to Disconnect the Mobility Device After Charging 1. Once charging is complete, disconnect the battery charger from the power supply. 2. Disconnect the plug from the remote. 7.4.5 Storage and Maintenance Follow the instructions listed below to ensure safe use and longevity of the batteries: 52 l Always store the batteries fully charged. l Do not leave the batteries in a low state of charge for an extended length of time. Charge a discharged battery as soon as possible. l In case your mobility device is not used for a longer period of time (that is more than two weeks), the batteries must be charged at least once a month to maintain a full charge and always be charged before use. l Avoid hot and cold extremes when storing. We recommend to store batteries at a temperature of 59°F (15 °C). l Gel and AGM batteries are maintenance-free. Any performance issues should be handled by a properly trained mobility device technician. 7.4.6 Using the Proper Batteries WARNING! Risk of Injury or Damage Improper configuration of battery terminals may cause injury or damage. -Batteries with terminal configuration as shown MUST be used. -The POSITIVE (+) battery cable MUST connect to the POSITIVE (+) battery terminal. -The NEGATIVE (-) battery cable MUST connect to the NEGATIVE (-) battery terminal. -DO NOT allow any of your tools and/or battery cables 60101916-A