Invacare IFX-20MP Owners Manual - Page 75

Replace Every 18 Months, 10.4 Removing/Installing the Shrouds

Page 75 highlights

them replaced by a qualified technician. 10.3.2 Replace Every 18 Months Replace gearbox coupling. 10.4 Removing/Installing the Shrouds CAUTION! -Place the wheelchair in a well ventilated area where work can be performed without risking damage to carpeting or floor covering. 10.4.1 Removing/Installing the Rear Shroud Assembly 10 Service Fig. 10-1 Removing/Installing the Rear Shroud Assembly Seat assembly not shown for clarity. Fig. 10-2 Removing/Installing the Rear Shroud Assembly Disconnecting the lighting board Removing the Rear Shroud Assembly 1. Verify the joystick On/Off switch is in the Off position. 2. Pull up to disengage the top of the rear shroud assembly A from the battery box B. 3. Pull up to disengage the keyholes C from the battery box pegs D. 4. Remove the rear shroud assembly from the battery box, one side at a time. 60101916-A 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

them replaced by a qualified technician.
10.3.2 Replace Every 18 Months
Replace gearbox coupling.
10.4 Removing/Installing the Shrouds
CAUTION!
-Place the wheelchair in a well ventilated area where
work can be performed without risking damage to
carpeting or floor covering.
10.4.1 Removing/Installing the Rear Shroud Assembly
Fig. 10-1 Removing/Installing the Rear Shroud Assembly
Seat assembly not shown for clarity.
Fig. 10-2 Removing/Installing the Rear Shroud Assembly -
Disconnecting the lighting board
Removing the Rear Shroud Assembly
1.
Verify the joystick On/Off switch is in the Off position.
2.
Pull up to disengage the top of the rear shroud assembly
A
from the battery box
B
.
3. Pull up to disengage the keyholes
C
from the
battery box pegs
D
.
4.
Remove the rear shroud assembly from the battery box,
one side at a time.
60101916-A
75
10 Service