Invacare IFX-20MP Owners Manual - Page 76
Installing the Rear Shroud Assembly, bumper screws
View all Invacare IFX-20MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Invacare® AVIVA™ FX 5. If lights are present, disconnect the front lights connector E and the light power cable connector F from the rear lighting harness G inside of the rear shroud. Installing the Rear Shroud Assembly 1. If lights are present, connect the front lights connector E and the light power cable connector F to the rear lighting harness G inside of the rear shroud. Ensure they are connected in the proper location, marked by the labels on each cable. 2. Install the keyhole C in the bottom of the rear shroud assembly A onto the pegs D on the battery box B, one side at a time. 3. Rotate the top of the rear shroud assembly forward under bumper screws H, if present. Route the cables: Fig. 10-3 Installing the Rear Shroud Assembly - Routing the lighting and motor cables A. Route motor cables I and light cables J through the top opening in both sides of the rear shroud. B. Group other cables K and route through the front right opening in the top shroud. 76 60101916-A