Invacare IFX-20MP Owners Manual - Page 84
Replacing Battery Cables
View all Invacare IFX-20MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Invacare® AVIVA™ FX 9. Connect the left motor cables G to the power module Pas noted during the battery removal procedure. 11. Install the rear shroud. Refer to 10.4.1 Removing/Installing the Rear Shroud Assembly , page 75. 12. Switch the battery isolation switch to the ON position. Refer to 7.3 Using the Battery Isolation Switch, page 48 . 13. If Installing NEW batteries-The Battery Synchronization Procedure MUST be performed within 24 hours of powering on the wheelchair. Otherwise the battery gauge will not display accurate battery charge levels. The Battery Synchronization Procedure can be found in the LiNX service manual and must be performed by a provider or qualified technician. 10.5.6 Replacing Battery Cables 7/16 inch (6 pt) Box Torque Wrench Fig. 10-8 Connecting the motor cable 10. If tie-wraps were removed, tie-wrap the cables as noted during the battery removal procedure. 84 60101916-A