Invacare IFX-20MP Owners Manual - Page 58

Transferring Mobility Device to Vehicle, The mobility device is at risk of tipping

Page 58 highlights

Invacare® AVIVA™ FX 8.4 Transferring Mobility Device to Vehicle WARNING! The mobility device is at risk of tipping over if it is transferred to a vehicle while the user is still seated in the mobility device -Transfer the mobility device without the user whenever possible. -If the mobility device with the user has to be transferred to a vehicle using a ramp, ensure the ramp is properly secured. Refer to the ramp instructions. Ensure that the ramp does not exceed the rated slope (refer to Chapter 13 Technical Data, page 92). -If the mobility device has to be transferred to a vehicle using a ramp that does exceed the rated slope (refer to Chapter 13 Technical Data, page 92), a winch (a chain or wire rope attached to a drum with a crank) must be used to transfer the wheelchair into the vehicle. Ensure the winch has a rated weight capacity greater than the weight of the wheelchair. Refer to the winch instructions. An attendant can then safely monitor and assist the transfer process. WARNING! The mobility device is at risk of tipping over if it is transferred to a vehicle while the user is still seated in the mobility device -Alternatively, a platform lift may be used. -Ensure that the total weight of the mobility device including the user does not exceed the maximum permitted total weight for the ramp or platform lift. -The mobility device should always be transferred to a vehicle with the backrest in an upright position, the seat lifter lowered and the seat tilt in the upright position. WARNING! Risk of injury and damage to the mobility device If the mobility device is to be transferred to a vehicle via a lift, when the remote is turned on, there is a risk that the device may act erratically and fall off the lift. -Before transferring the mobility device via a lift, turn off the product and disconnect either the bus cable from the remote or the batteries from the system. 1. Drive or push your mobility device into the transport vehicle using a suitable ramp. 58 60101916-A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

8.4 Transferring Mobility Device to Vehicle
WARNING!
The mobility device is at risk of tipping over if it is
transferred to a vehicle while the user is still seated
in the mobility device
-Transfer the mobility device without the user
whenever possible.
-If the mobility device with the user has to
be transferred to a vehicle using a ramp,
ensure the ramp is properly secured. Refer
to the ramp instructions. Ensure that the
ramp does not exceed the rated slope (refer
to
Chapter 13
Technical Data, page 92
).
-If the mobility device has to be transferred to a
vehicle using a ramp that does exceed the rated
slope (refer to
Chapter 13
Technical Data, page 92
),
a winch (a chain or wire rope attached to a drum
with a crank) must be used to transfer the
wheelchair into the vehicle. Ensure the winch has a
rated weight capacity greater than the weight of the
wheelchair. Refer to the winch instructions. An
attendant can then safely monitor and assist the
transfer process.
WARNING!
The mobility device is at risk of tipping
over if it is
transferred to a vehicle while the user is still seated
in the mobility device
-Alternatively, a platform lift may be used.
-Ensure that the total weight of the mobility device
including the user does not exceed the maximum
permitted total weight for the ramp or platform lift.
-The mobility device should always be
transferred to a vehicle with the backrest in an
upright position, the seat lifter lowered and the
seat tilt in the upright position.
WARNING!
Risk of injury and damage to the mobility device
If the mobility device is to be transferred to a vehicle
via a lift, when the remote is turned on, there is a risk
that the device may act erratically and fall off the lift.
-Before transferring the mobility device via a lift, turn
off the product and disconnect either the bus cable
from the remote or the batteries from the system.
1.
Drive or push your mobility device into the transport
vehicle using a suitable ramp.
58
60101916-A
Invacare® AVIVA™ FX