Invacare M41SR16R Owners Manual - Page 11
General Guidelines
View all Invacare M41SR16R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
SECTION 1-GENERAL GUIDELINES SECTION 1-GENERAL GUIDELINES ƽ WARNING SECTION 1 - GENERAL GUIDELINES contains important information for the safe operation and use of this product. Controller Settings/Repair or Service Set‐up of the Electronics Control Unit is to be performed only by a qualified technician. The final adjustments of the controller may affect other activities of the wheelchair. Damage to the equipment could occur if improperly set‐up or adjusted. Wheelchairs should be examined during maintenance for signs of corrosion (water exposure, incontinence, etc.). Electrical components damaged by corrosion should be replaced IMMEDIATELY. Wheelchairs that are used by incontinent users and/or are frequently exposed to water may require replacement of electrical components more frequently. Accessories Information Extreme care should be exercised when using oxygen in close proximity to electric circuits and other combustible materials. Contact your oxygen supplier for instruction in the use of oxygen. Operation Information Performance adjustments should only be made by professionals of the healthcare field or persons fully conversant with this process and the driverʹs capabilities. Incorrect settings could cause injury to the driver, bystanders, damage to the chair and to surrounding property. After the wheelchair has been set‐up, check to make sure that the wheelchair performs to the specifications entered during the set‐up procedure. If the wheelchair does not perform to specifications, turn the wheelchair Off immediately and re‐enter set‐up specifications. Repeat this procedure until the wheelchair performs to specifications. ALWAYS shift your weight in the direction you are turning. DO NOT shift your weight in the opposite direction of the turn. Shifting your weight in the opposite direction of the turn may cause the inside drive wheel to lose traction and the wheelchair to tip over. DO NOT shift your weight or sitting position toward the direction you are reaching as the wheelchair may tip over. DO NOT engage or disengage the motor release levers until the power is in the Off position. DO NOT operate on roads, streets or highways. Part No. 1143206 11 Pronto® M41 with SureStep®