Invacare M41SR16R Owners Manual - Page 50
Shroud And, Wheels
View all Invacare M41SR16R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
SECTION 11-SHROUD AND WHEELS SECTION 11-SHROUD AND WHEELS ƽ WARNING After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service verify that on/off switch on the joystick is in the off position. Replacing the Flat Free Tires on the Wheel Rim ƽ WARNING DO NOT attempt to replace flat free tires. This procedure MUST be performed by a qualified technician. NOTE: During initial use of the wheelchair, the user may experience flat spots on the wheels. Flat spots will vanish with continued use of the wheelchair. Removing/Installing the Top Shroud NOTE: For this procedure, refer to FIGURE 11.1 on page 51. Removing 1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 38. 2. Remove the four mounting screws that secure the top shroud to the wheelchair frame. Installing 1. Pull joystick cable through the center hole in the top shroud. 2. Position the top shroud onto the wheelchair frame. 3. Using the four mounting screws, secure the top shroud to the wheelchair frame. 4. Install the seat. Refer to Removing/Installing the Seat Assembly on page 38. Pronto® M41 with SureStep® 50 Part No. 1143206