Invacare M41SR16R Owners Manual - Page 42
Adjusting the Footboard Assembly
View all Invacare M41SR16R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SECTION 9-FOOTBOARD ASSEMBLY Shroud Footboard Assembly DETAIL "A" - TOP VIEW OF FOOTBOARD Outer Edge of Tube Detent Balls Mounting Hole Quick Release Pin Detent Ball Quick Release Pin FIGURE 9.1 Removing/Installing the Footboard Assembly Adjusting the Footboard Assembly Angle NOTE: For this procedure, refer to FIGURE 9.2. 1. Loosen the jam nut and set screw located underneath on the backside of the footplate. 2. Adjust the set screw in or out to obtain the desired footboard assembly angle. 3. Thread the jam nut and washer inward until it is flush with the footboard bracket. 4. Securely tighten the jam nut and washer to secure the mounting screw in place. Set Screw, Washer and Jam Nut Footboard Assembly FIGURE 9.2 Adjusting the Footboard Assembly - Angle Pronto® M41 with SureStep® 42 Part No. 1143206