Invacare M41SR16R Owners Manual - Page 46
Adjusting Footrest Height
View all Invacare M41SR16R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SECTION 10-FRONT RIGGINGS Removing 1. Push the front rigging release lever inward and rotate the footrest out. 2. Lift up on front rigging and remove from the wheelchair. 3. Repeat STEPS 1‐2 for opposite side of wheelchair. Adjusting Footrest Height Model PHWH93 NOTE: For this procedure, refer to FIGURE 10.2. 1. Remove any accessories from the footrest(s). 2. Remove the footrest from the wheelchair. Refer to Installing/Removing Front Riggings on page 45. NOTE: Lay footrest on a flat surface to simplify section. 3. Remove the hex bolt, coved washers and locknut that secure the lower footrest to the footrest support. 4. Reposition the lower footrest to the desired height. 5. Reinstall hex bolt, coved washers and locknut that secure lower footrest to footrest support. Tighten securely. 6. Repeat STEPS 1‐5 for the opposite side of the wheelchair footrest, if necessary. 7. Reinstall the footrest(s) onto the wheelchair. Refer to Installing/Removing Front Riggings on page 45. 8. Reinstall any accessories onto the footrest(s). Footrest Support Locknut Coved Washer Coved Washer Hex Bolt Lower Footrest FIGURE 10.2 Adjusting Footrest Height - Model PHWH93 Pronto® M41 with SureStep® 46 Part No. 1143206