Invacare M41SR16R Owners Manual - Page 54
Removing/Installing Forks and/or Caster Assemblies, Adjusting Anti-Dive Springs
View all Invacare M41SR16R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
SECTION 11-SHROUD AND WHEELS Removing/Installing Forks and/or Caster Assemblies NOTE: For this procedure, refer to FIGURE 11.4. NOTE: Front and rear forks are replaced in the same manner. Removing 1. Remove the caster from the fork if necessary. Refer to Removing/Installing Casters on page 52. 2. Remove the head tube cap. 3. Remove locknut, washer and spacer securing the fork to the headtube. Installing 1. Insert threaded post of fork into headtube. NOTE: Check the bearing assemblies. Replace if necessary. 2. Slide the fork completely into headtube. 3. Secure fork to headtube with locknut, washer, and spacer. Secure tightly. ƽ WARNING Improper positioning of the washer will prohibit the free movement of the forks which may result in injury to the occupant. 4. Install the caster onto the fork if removed. Refer to Removing/Installing Casters on page 52. 5. Install headtube cap. Adjusting Anti-Dive Springs ƽ WARNING DO NOT attempt to replace or adjust the anti-dive springs. This procedure MUST be performed by a qualified technician. NOTE: The anti‐dive springs may be adjusted accordingly to users weight. Pronto® M41 with SureStep® 54 Part No. 1143206