Invacare M41SR16R Owners Manual - Page 36

SECTION 7-ARMS Adjusting the Arms Adjusting Width NOTE: For this procedure, refer to FIGURE 7.2. 1. Loosen the two lock knobs that secure the arms to the arm support tube. NOTE: Both arms should be adjusted to the same distance away from the arm support tube. NOTE: Changing the width of the arms may also affect the overall width of the wheelchair. 2. Reposition the arms until desired width is achieved. 3. Securely tighten the two lock knobs that secure the arms to the arm support tube. NOTE: Semi‐Recline Back seat shown. Fold Down Back seats adjusts the same way. Seat Arm Lock Knob Arm Support Tube FIGURE 7.2 Adjusting Width Adjusting Angle ƽ WARNING Pinch point may occur when adjusting the arm angle position. Arm Pad Adjustment Screw Pinch Point NOTE: For this procedure, refer to FIGURE 7.3. 1. Lift up the arm pad. 2. Loosen the jam nut. 3. Adjust the socket screw up or down to the desired arm angle position. Count Exposed Thread Jam Nut FIGURE 7.3 Adjusting Angle 4. Tighten the jam nut. 5. To determine the same angle for the opposite arm pad, count the exposed threads after the jam nut has been tightened. 6. Repeat STEPS 1‐5 for opposite armrest, if necessary. Pronto® M41 with SureStep® 36 Part No. 1143206