Invacare M41SR16R Owners Manual - Page 40
Replacing the Seat Positioning Strap
View all Invacare M41SR16R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
SECTION 8-SEAT Replacing the Seat Positioning Strap ƽ WARNING ALWAYS wear your seat positioning strap. The seat positioning strap is a positioning belt only. It is not designed for use as a safety device withstanding high stress loads such as auto or aircraft safety belts. If signs of wear appear, belt MUST be replaced IMMEDIATELY. NOTE: For this procedure, refer to FIGURE 8.4. 1. Remove the two mounting screws that secure the seat positioning straps to the seat frame. 2. Remove the two halves of the seat positioning strap from the rear seat frame. 3. Reposition the two new seat positioning strap halves underneath seat rails. 4. Reinstall the two mounting screws that secure the seat positioning straps to the seat frame. Securely tighten. Seat NOTE: Semi‐Recline Back seat shown. Seat Lever Seat Positioning Strap Seat Positioning Strap Mounting Screws FIGURE 8.4 Replacing the Seat Positioning Strap Pronto® M41 with SureStep® 40 Part No. 1143206