Invacare M41SR16R Owners Manual - Page 56

Repositioning the Joystick

Get Invacare M41SR16R PDF manuals and user guides View all Invacare M41SR16R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

SECTION 12-ELECTRONICS Repositioning the Joystick NOTE: For this procedure, refer to FIGURE 12.2. NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick assembly. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Remove the joystick from the wheelchair. 3. Remove the three hex mounting screws, spacers and locknuts that secure the mounting bracket to the three mounting holes on the arm frame. NOTE: The mounting bracket is mounted to the inside of the arm frame. 4. Reposition the mounting bracket on the opposite arm frame. 5. Using the three hex mounting screws, spacers and locknuts secure the mounting bracket to the three mounting holes of the arm frame. 6. If necessary, perform the following to reposition the adjustment lock: A. Slide the adjustment lock from the mounting bracket. B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting bracket. 7. Slide joystick mounting tube through the mounting bracket to the desired position and secure adjustment lock to tube by turning lever on adjustment lock. Mounting Bracket Hex Mounting Screws Adjustment Lock Lever Armrest Plate Locknuts Mounting Holes on Arm Spacers Frame FIGURE 12.2 Repositioning the Joystick Pronto® M41 with SureStep® 56 Part No. 1143206

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
SECTION 12—ELECTRONICS
Pronto® M41 with SureStep®
56
Part No. 1143206
Repositioning the Joystick
NOTE: For this procedure, refer to FIGURE 12.2.
NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick
assembly.
1.
Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2.
Remove the joystick from the wheelchair.
3.
Remove the three hex mounting screws, spacers and locknuts that secure the
mounting bracket to the three mounting holes on the arm frame.
NOTE: The mounting bracket is mounted to the inside of the arm frame.
4.
Reposition the mounting bracket on the opposite arm frame.
5.
Using the three hex mounting screws, spacers and locknuts secure the mounting
bracket to the three mounting holes of the arm frame.
6.
If necessary, perform the following to reposition the adjustment lock:
A. Slide the adjustment lock from the mounting bracket.
B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the
mounting bracket.
7.
Slide joystick mounting tube through the mounting bracket to the desired position
and secure adjustment lock to tube by turning lever on adjustment lock.
FIGURE 12.2
Repositioning the Joystick
Hex Mounting Screws
Locknuts
Adjustment Lock Lever
Mounting Bracket
Armrest Plate
Spacers
Mounting Holes on Arm
Frame