Invacare M41SR16R Owners Manual - Page 52

SECTION 11-SHROUD AND WHEELS Engaging/Disengaging Motor Release Lever ƽ WARNING DO NOT engage or disengage the motor release lever until the On/Off switch on the joystick is in the Off position. CAUTION Ensure both motor release levers are fully engaged before driving the wheelchair NOTE: For this procedure, refer to FIGURE 11.2 on page 52. NOTE: The motor lock disengagement/engagement allows freewheeling or joystick controlled operation. Freewheeling allows an attendant to maneuver the wheelchair without power. 1. Locate the motor release handles on the motors protruding through the shroud on the front of the wheelchair behind the footboard. 2. Perform one of the following: • To Disengage the Motor Release Levers ‐ Push the motor lock lever down. NOTE: This allows the wheelchair to freewheel for pushing, if necessary. NOTE: It may be necessary to rock the wheels slightly until the motor release lever disengages. • To Engage the Motor Release Levers ‐ Pull the motor lock handles up. NOTE: This allows the motors to drive the wheels. Motor Release Levers Engaged Disengaged FIGURE 11.2 Engaging/Disengaging Motor Release Lever Removing/Installing Casters NOTE: For this procedure, refer to FIGURE 11.3. NOTE: Front and rear casters are replaced in the same manner. Periodically, the tires will need to be replaced due to wear or puncture. Pronto® M41 with SureStep® 52 Part No. 1143206