Invacare M41SR16R Owners Manual - Page 49
FRONT RIGGINGS, Adjusting/Replacing Telescoping Front Rigging Supports, FRONT RIGGING,
View all Invacare M41SR16R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
SECTION 10-FRONT RIGGINGS NOTE: The footplate will be on the inside of the wheelchair when locked in place. 4. Using the two socket bolts and locknuts, secure the telescoping front rigging support to the seat frame as shown in FIGURE 10.6. 5. If necessary, repeat STEPS 2‐4 on remaining telescoping front rigging support. 6. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 38. Mounting Bolts Seat Locknuts Telescoping Front Rigging Support Hinge Pins Spacers Inner Mounting Holes 87654 32 Not Used Mounting Holes FRONT RIGGING MODEL PHW93 PH904A and PHAL4A STANDARD POSITION 18 inches wide 20 inches wide Holes 4 and 5 Holes 4 and 5 Holes 3 and 4 Holes 3 and 4 1 INCH OUT 18 inches wide Holes 5 and 6 Holes 4 and 5 20 inches wide Holes 5 and 6 Holes 4 and 5 2 INCHES OUT 18 inches wide Holes 6 and 7 Holes 5 and 6 20 inches wide Holes 6 and 7 Holes 5 and 6 FIGURE 10.6 Adjusting/Replacing Telescoping Front Rigging Supports Part No. 1143206 49 Pronto® M41 with SureStep®