JVC GRD396US Instructions - Page 17
Grip Adjustment, Viewfinder Adjustment, Brightness Adjustment Of The Display, Tripod Mounting
UPC - 046838026096
View all JVC GRD396US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
GETTING STARTED EN 17 GETTING STARTED Grip Adjustment 1 Adjust the velcro strip. ● Before making the adjustment, remove any security tags that may be attached to the velcro. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip to easily operate the Recording Start/Stop Button, Power Switch and Power Zoom Lever. Be sure to fasten the velcro strip to your preference. Viewfinder Adjustment 1 Set the Power Switch to "REC" while pressing down the Lock Button located on the switch. 2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability. 3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused. Example: Brightness Adjustment Of The Display 1 Set the Power Switch 3 to "REC" or "PLAY" while 2 pressing down the Lock Button located on the 1 switch. 2 Open the LCD monitor fully. (੬ pg. 19) 4 ● To adjust the brightness of the viewfinder, pull out the viewfinder fully and set "PRIORITY" to "FINDER" MENU (੬ pg. 31, 33). 3 Press MENU. The Menu Screen appears. If BRIGHT - 5 BRIGHT - 5 you are in Playback mode, please proceed to Step 5. 4 Press 3, 4, 2 or 1 to select "DISPLAY", and press SET. The DISPLAY Menu appears. 5 Press 3, 4, 2 or 1 to select "BRIGHT", and press SET. The Menu Screen closes and the brightness control menu appears. 6 Press 3 or 4 until the appropriate brightness is reached and press SET or 2. 7 Press MENU. The menu screen closes. Tripod Mounting Diopter Adjustment Control CAUTION: When retracting the viewfinder, take care not to pinch your fingers. To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise. ● Some tripods are not equipped with studs.