Kenmore 1317 Use and Care Guide - Page 7

START-UP / QUICK REFERENCE CYCLES OPTIONS M M M M M M M M M W M 246 IM! M M Smart Wash _* Pots Pans Normal Wash China Gentle 1 Hour Wash Quick Rinse Turbo Zone Hi Temp S/eam Top Rack Heated _ Hol_4s_. Sanitize Only Dry Delay Hours CANCEL [tRAIN START RESUME ULTRA WASH ® removable filters Provide The triple filter system has a Coarse Filter to keep oversized items and foreign objects out of the pump, a Fine Filter to keep food from being recirculated onto your dishware, and a Micro Filter to capture very fine food particles. See "ULTRA WASH ®HEFILTRATION SYSTEM" for information on removing and maintaining the filters. Tall items placed in the lower rack may block the dispenser door. Cookie sheets and cutting boards loaded on the left-hand side of the dishwasher can easily block the dispenser. If detergent is inside of the dispenser or on the bottom of the tub after the cycle is complete, the dispenser was blocked. Drying -Rinse Aid is essential. You must use rinse aid for good drying performance. (Fill dispenser with the entire sample included). Rinse aid along with the Heated Dry option will provide best drying and avoid excessive moisture in the dishwasher interior. USE RINSE AID FOR Rellll_ Full @ Add 1 Hour Wash, When you need fast results. To save water and energy, High Efficiency dishwashers use advanced filtration which may result in longer cycle times (in some cases over 2 hours). When you need fast results, the 1 Hour Wash will clean your dishes using slightly more water and energy. For improved drying, select the Heated Dry option, adding 1/2hour. Optical soil sensors are used in the cycle to provide optimal energy and water consumption based on load size, soil amount and toughness of soil. The sensors also automatically calibrate throughout the life of your dishwasher to maintain cleaning performance based on your water conditions. When the TurboZone TM option is selected, it provides a concentrated wash on the back of the lower dish rack for hard-to-clean dishes. Press START/RESUME every time you add a dish. To start and resume a cycle, press START/RESUME and close the door within 3 seconds. If the door is not closed within 3 seconds, the start button LED will flash and the cycle will not start. IMPORTANT: If anyone opens the door (such as, adding a dish, even during the Delay Hours option), the START/ RESUME button must be pressed each time and the door closed within 3 seconds to resume the cycle.