Konica Minolta bizhub 36 bizhub 36/42 Administrator Operations User Guide - Page 225
In Remote Printer mode using the NetWare 4.x Bindery Emulation, In Print Server mode using
View all Konica Minolta bizhub 36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
5.7 [Network] tab 5 In Remote Printer mode using the NetWare 4.x Bindery Emulation 0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the NetWare server. 1 From the client, log in the NetWare file system as Bindery with the administrator authority. 2 Start Pconsole. 3 Select [Quick Setup] from [Available Options] list box, and press the Enter key. 4 Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth- er/Unknown], and save them. 5 Terminate Pconsole by pressing the Esc key. 6 Load the PSERVER.NLM file on the NetWare Server console. Then, configure the following settings in [NetWare Setting]. Item [IPX/SPX] [Ethernet Frame Type] [NetWare Print Mode] [Printer Name] [Printer Number] Description Select [Enable]. Select a frame type to be used. Prior check Frame type Select [NPrinter/RPrinter]. Enter a printer name to be operated as the NPrinter/RPrinter (up to 63 characters, excluding Enter the NPrinter/RPrinter number. The print server name specified in Step 4 In Print Server mode using the NetWare 4.x Bindery Emulation 0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the NetWare server. 0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server. 1 From the client, log in the NetWare file system as Bindery with the administrator authority. 2 Start Pconsole. 3 Select [Quick Setup] from [Available Options] list box, and press the Enter key. 4 Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth- er/Unknown], and save them. 5 Terminate Pconsole by pressing the Esc key. Then, configure the following settings in [NetWare Setting]. Item [IPX/SPX] [Ethernet Frame Type] [NetWare Print Mode] [Print Server Name] [Print Server Password] Description Select [Enable]. Select a frame type to be used. Select [PServer]. Enter a print server name to be operated as PServer (up to 63 characters, excluding Enter a print server password if necessary (up to 63 characters). Prior check Frame type The print server name specified in Step 4 bizhub 42/36 5-137