Konica Minolta bizhub 36 bizhub 36/42 Administrator Operations User Guide - Page 29

4.1 [Machine Settings] 4 Settings [Auto Reset Settings] [Enable] Select whether or not to exit the current screen and return to the home screen if the machine is not used over a period of time. [Shift Output Each Job] [Low Power Mode Setting] [LowPowerMode Time Setting] d Reference If user authentication or enhanced security mode is enabled, the administrator settings mode or user authentication mode is logged off according to the setting for System Auto Reset Time. [Auto Reset] Specify the period of time before the auto reset function starts working. [Priority Mode] Configure a screen to be displayed in the system auto reset mode. Select whether to shift the output paper for each job. This item is displayed if the Finisher FS-529 is installed. Set whether or not exchanged to low power mode. Low power mode refers to a power saving state into which the machine automatically enters and in which the touch panel goes off if the machine is not used over a period of time. Set a time period before switching to the low power mode when this machine is not being operated. The following items can be set; [1 min.], [2 min.], [3 min.], [4 min.], [5 min.], [6 min.], [7 min.], [8 min.], [9 min.], [10 min.], [11 min.], [12 min.], [13 min.], [14 min.], [15 min.], [30 min.], [45 min.], [1 Hour], or [3 Hours]. The low power switching time is always as long as the sleeping time. If the switching time is longer, the sleep mode may come before the low power mode. This item is not displayed if [Low Power Mode Setting] is set to [OFF]. Factory default [Sleep Time Setting] [Auto Power OFF Setting] [Time Zone] [Daylight Saving Time] [Report Input Tray] [Auto Reset Settings] [Shift Output Each Job] [Low Power Mode Setting] [LowPowerMode Time Setting] bizhub 42 [1 Hour] bizhub 36 [45 min.] This value varies depending on the area. [00:00] [OFF] [Tray 2] [Enable]: [ON] [Auto Reset]: [1] [Priority Mode]: [Home] [ON] [ON] [15 min.] bizhub 42/36 4-4