Konica Minolta bizhub 36 bizhub 36/42 Administrator Operations User Guide - Page 35
Ethernet] - enabling network
View all Konica Minolta bizhub 36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
4.5 [Ethernet] 4 4.5 [Ethernet] Configure network settings. These settings are required before using this machine via the network. 4.5.1 [TCP/IP] Specify network settings for the machine. If you change the setting items below and exit the Ethernet menu, the machine is rebooted. - [Enable] - [DHCP] - [BOOTP] - [ARP/PING] - [SLP] - [SNMP] - [IPv6]-[Enable] - [Auto Setting] % Press the Utility/Counter key ö [Admin Settings] ö [Ethernet] ö [TCP/IP]. Settings [Enable] [IP Address] [Subnet Mask] [Gateway] [DHCP] [BOOTP] bizhub 42/36 Select the TCP/IP setting. [ON]: Enables the TCP/IP setting. [OFF]: Disables the TCP/IP setting. Items except for this one are not displayed. To directly specify the IP address, enter the IP address of this machine. Format: *.*.*.* (Asterisk * can be 0 to 255) If the IP address is specified here, the following items are set to [OFF]. • DHCP • BOOTP • ARP/PING When directly entering the IP address, configure the subnet mask of the network to be connected. Format: *.*.*.* (Asterisk * can be 0 to 255) When directly entering the IP address, specify the default gateway of the network to be connected. Format: *.*.*.* (Asterisk * can be 0 to 255) If there is a DHCP server on the network, specify whether the IP address and other network information are automatically assigned by the DHCP server. If the IP address is manually specified, [DHCP] is automatically set to [OFF]. If there is a BOOTP server on the network, specify whether the IP address and other network information are automatically assigned by the BOOTP server. If the IP address is manually specified, [BOOTP] is automatically set to [OFF]. 4-10