Konica Minolta bizhub C3100P bizhub C3100P Applied Functions User Guide - Page 33
[Auto Logout], If [EAP-TLS], [EAP-TTLS], [PEAP], or [Server Specification] is selected - admin password
View all Konica Minolta bizhub C3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1.5 Available operations in Administrator mode 1 Item [Password] [TTLS Anonymous Name] [TTLS Authentication Type] [Send Client Certificate] [Server ID] [Encryption Strength] [Network Stop] Description Enter the password (using ASCII characters of up to 128 bytes). The password is used for all EAP types other than [EAP-TLS]. To enter (change) the password, select the [Change Password] check box, then enter a new password. Enter the anonymous name used for EAP-TTLS authentication (using ASCII characters of up to 128 bytes) if [EAP Type] is set to [EAP-TTLS] or [Server Specification]. [anonymous] is specified by default. Select an internal authentication protocol for EAP-TTLS if [EAP Type] is set to [EAP-TTLS] or [Server Specification]. [MS-CHAPv2] is specified by default. Select whether or not to encrypt the authentication information using a certificate for this machine, if necessary. This setting can be configured if the following conditions are satisfied: • An optional Hard Disk is installed, and the certificate is registered in this machine. • [EAP-TTLS], [PEAP], or [Server Specification] is selected from [EAP Type]. To verify CN of the certificate, enter the server ID (using ASCII characters of up to 64 bytes). If [EAP-TLS], [EAP-TTLS], [PEAP], or [Server Specification] is selected from [EAP Type], select an encryption strength for encryption by TLS, if necessary. • [Medium]: Keys that are more than 56 bits in length are used for communi- cation. • [High]: Keys that are more than 128 bits in length are used for communica- tion. [Medium] is specified by default. Specify the delay time between the start of an authentication process and the end of network communication, if necessary. If an authentication process does not succeed within the specified time, all network communication will stop. To specify the delay time, set [Network Stop] to [Enable], and enter the delay (sec.) in [Limit Time]. To restart the authentication process after network communication stopped, reboot this machine. [Disable] is specified by default. [Auto Logout] To display: Administrator mode - [Security] - [Auto Logout] - [Auto Logout] If you do not operate this machine for a given period of time after you log in to Web Connection, you will automatically be logged out. If necessary, you can change the time period before you are automatically logged out. Item [Admin Mode Logout Time] [User Mode Logout Time] Description Select a time period until the user is automatically logged out of the administrator mode. [10] minutes is specified by default. Select a time period until the user is automatically logged out of the user mode. [60] minutes is specified by default. [Applied Functions] 1-28