Konica Minolta bizhub C3100P bizhub C3100P Applied Functions User Guide - Page 50
[Web Service Settings] - [Common Settings]
View all Konica Minolta bizhub C3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
1.5 Available operations in Administrator mode 1 Item [Read Community Name] [Write] [Write Community Name] [SNMP v3 Settings] [Context Name] [Discovery] [Discovery User Name] [Read User Name] [Security Level] [auth-password] [priv-password] [Write User Name] [Security Level] [auth-password] [priv-password] [Encryption Algorithm] [Authentication Method] [Trap Settings] [Allow Setting] [Trap Setting When Authentication Fails] Description Enter a read-only community name (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and #). [public] is specified by default. Select whether or not to enable the read and write functions. [Enable] is specified by default. If [Write] is set to [Enable], enter the community name in the read-write enable state (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and #). [private] is specified by default. Configure the SNMP v3 settings. Enter a context name (using ASCII characters of up to 63 bytes, excluding spaces, \, ,' ,", and #). Select whether or not to allow a user for detection. [Enable] is specified by default. If [Discovery] is set to [Enable], enter a user name for detection (using ASCII characters of up to 32 bytes, excluding spaces, \, ,' ,", and #). [public] is specified by default. Enter a read-only user name (ASCII characters of up to 32 bytes, excluding spaces, \, ,' ,", and #). [initial] is specified by default. Select a security level for the read-only user. [Auth-password/Priv-password] is specified by default. Enter an authentication password for the read-only user (using ASCII characters between 8 and 32 bytes, excluding spaces, \, ,' ,", and #). To enter (change) the password, select the [Change Password] check box, then enter a new password. Enter a privacy password for the read-only user (using ASCII characters between 8 and 32 bytes, excluding spaces, \, ,' ,", and #). To enter (change) the password, select the [Change Password] check box, then enter a new password. Enter a user name used by the read and write user (using ASCII characters of up to 32 bytes, excluding spaces, \, ', ", and #). [restrict] is specified by default. Select a security level of the read and write user. [Auth-password/Priv-password] is specified by default. Enter an authentication password for the read and write user (using ASCII characters between 8 and 32 bytes, excluding spaces, \, ,' ,", and #). To enter (change) the password, select the [Change Password] check box, then enter a new password. Enter a privacy password for the read and write user (using ASCII characters between 8 and 32 bytes, excluding spaces, \, ,' ,", and #). To enter (change) the password, select the [Change Password] check box, then enter a new password. Select an encryption algorithm. [DES] is specified by default. Select an authentication algorithm. [MD5] is specified by default. Configure the settings on the SNMP TRAP function. Select whether or not to allow a notification of the status of this machine using the SNMP TRAP function. [Enable] is specified by default. Select whether or not to send TRAP when authentication fails. [Disable] is specified by default. [Web Service Settings] - [Common Settings] To display: Administrator mode - [Network] - [Web Service Settings] - [Common Settings] [Applied Functions] 1-45