Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 221

Using Various Functions > Functions Continuous Scan Copy Send Scan to USB Scans a large number of originals in separate batches and then produce as one job. Originals will be scanned continuously until you select [End Scan]. (Value: [Off] / [On]) 1 11 21 1 1~10 11~20 21~30 1~30 Job Finish Notice Copy Print from Box Print from USB Send Scan to USB Sends E-mail notice when a job is complete. Users can be notified of the completion of a job while working at a remote desk, saving the time spent waiting beside the machine to finish. NOTE PC should be configured in advance so that E-mail can be used. Command Center RX (page 2-38) E-mail can be sent to a single destination. Item Description Off Disables the function. On Address Book Select the notification destination from the Address Book or External Address Book. Select the destination on the Address Book or Ext Address Book screen, then select the [OK] key. Address Entry Enter E-mail address directly. Enter the address (up to 128 characters) and select the [OK] key. File Name Entry Copy Print from Box Print from USB Send Scan to USB Adds a file name. Additional information such as job number and date and time can also be set. You can check a job history or job status using the file name, date and time, or job number specified here. Enter the file name (up to 32 characters), and select the [OK] key. To add date and time, select [Date] and the [OK] key. To add job number, select [Job No.] and the [OK] key. To add both, select [Job No. + Date] or [Date + Job No.] and the [OK] key. 6-24