Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 273
System/Network, Network Setting
View all Kyocera ECOSYS M6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
Setup and Registration (System Menu) > System Menu System/Network Configures machine system settings. Network Setting [System Menu/Counter] key key > [System/Network] > [OK] key key > [Network Setting] > [OK] key Configures network settings. Host Name Item Host Name Description Check the host name of the machine. Host name can be changed from Command Center RX. Changing Device Information (page 2-42) TCP/IP Settings TCP/IP Item IPv4 Setting DHCP Auto-IP IP Address Subnet Mask Default Gateway IPv6 Setting Bonjour Description Set up TCP/IP to connect to the Windows network. Value: Off, On Set up TCP/IP (IPv4) to connect to the network. Select whether or not to use the DHCP (IPv4) server. Value: Off, On Select whether to use Auto-IP. Value: Off, On Set the IP addresses. Value NOTE If DHCP is set to [On], this item is displayed only and cannot be entered. Set the IP subnet masks. Value NOTE If DHCP is set to [On], this item is displayed only and cannot be entered. Set the IP gateway addresses. Value NOTE If DHCP is set to [On], this item is displayed only and cannot be entered. Select whether to use IPv6. Value: Off, On NOTE This setting is available when [TCP/IP] is [On]. The IPv6 settings are configured from the Command Center RX. Command Center RX User Guide Select whether or not to use Bonjour. Value: Off, On IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-26