Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 276

Setup and Registration (System Menu) > System Menu Secure Protocol Item SSL IPP Security HTTP Security SMTP Security POP3 Security 1 POP3 Security 2 POP3 Security 3 LAN Interface Item LAN Interface Description Select whether or not to use SSL. Value: Off, On Select the IPP security level. This setup is available when SSL is [On]. Value: IPP/IPP over SSL, IPPoverSSL only Select the HTTP security level. This setup is available when SSL is [On]. Value: HTTP/HTTPS, HTTPS only Select the communication protocol according to the type of security employed by the SMTP server. This setup is available when SSL is [On]. Value: Off, SSL/TLS, STARTTLS Select the communication protocol according to the type of security employed by the POP3 server. This setup is available when POP3 is [On]. Value: Off, SSL/TLS, STARTTLS Description Specify the settings for the LAN interface to be used. Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. Ping Ping Item Description Checks if communication with the destination by entering the host name or IP address of the destination is possible. NOTE If [NW InterfaceSend] is set to [Option NIC], this item is not displayed. Restart Network Item Restart Network Restarts the network. Description Optional Network [System Menu/Counter] key key > [System/Network] > [OK] key key > [Optional Network] > [OK] key Configure settings for the optional Network Interface Kit. NOTE This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed. 8-29