Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 280

Setup and Registration (System Menu) > System Menu Security Level [System Menu/Counter] key key > [System/Network] > [OK] key key > [Security Level] > [OK] key Item Security Level Description Specify the security level. Value Low: This mode is used during maintenance. Do not use normally. High: This is the security setting we recommend. Use this setting normally. Very High: In addition to [High] setting, this setting disables the machine settings to be changed from external command. Restart [System Menu/Counter] key key > [System/Network] > [OK] key key > [Restart] > [OK] key Restart Item Description Restart the CPU without turning the power switch off. Use this to deal with any unstable operation by the machine. (Same as the computer restart.) Data Security [System Menu/Counter] key key > [System/Network] > [OK] key key > [Data Security] > [OK] key Configure settings for data stored in the optional SSD and machine's memory. Item SSD Initializ. DataSanitization Description Initialize data saved on an optional SSD. Data Security Kit (E) Operation Guide NOTE This function is displayed when the optional SSD is installed and the optional Data Security Kit is activated. Return the following information registered in the machine to the factory defaults. • Address Book • System settings • Fax transmission and reception / forwarding data • Transmission histories • Data saved in Custom Box • Optional applications IMPORTANT Data saved in an application or SD card cannot be erased. To erase data on an SD card, you must format the SD card. Format SD Card (page 8-16) NOTE Once in progress, the processing cannot canceled. Before executing this function, disconnect modular, network, and other cables. Do not turn off the main power switch while sanitizing the data. If the main power is turned off during data erasing, erasing will be executed automatically when the power is restored, however, complete erasure cannot be guaranteed. 8-33