Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 345

Troubleshooting > Troubleshooting R Message Checkpoints Corrective Actions Reference Page RAM disk error. Press ― [OK]. An error has occurred on the RAM disk. Job is canceled. Select [OK]. The possible error codes and their descriptions are as follows. 04: Insufficient space on the RAM disk. If the optional RAM dis is installed, increase the RAM Disk Size by changing RAM Disk Mode in System Menu. page 8-19 NOTE The range of RAM disk size can be increased by selecting [Printer Priority] in Optional Memory. Removable Memory is ― full. Job is canceled.*1 Job is canceled. Select [OK]. ― Insufficient free space in the removable memory. Delete unneeded files. Remove original from Are there any originals left in the Remove originals from the ― document processor. document processor? document processor. Replace all originals and ― press Start key. Remove originals from the ― document processor, put them back in their original order, and place them again. Press the [Start] key to resume printing. Select [Cancel] to cancel the job. Replace MK. - Replacement of the parts in the - maintenance kit is necessary at every 200,000 pages (ECOSYS M6030cdn/ECOSYS M6530cdn) of printing and requires professional servicing. Contact your Service Representative. Replace the toner. ― Replace the toner container to our specified toner container. page 10-4 Restricted by Job - Accounting. Cannot print. This job is canceled because it is - restricted by Job Accounting. Select [OK]. *1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on Auto Error Clear, refer to the following: Auto Err. Clear (page 8-18) 10-23