Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 278

Setup and Registration (System Menu) > System Menu Item Description Custom Setup The detailed settings for wireless LAN can be changed. You can check the connection with a wireless network by selecting [Connect]. Netwk Name(SSID) Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects. NOTE Up to 32 characters can be entered. Connection Mode Set the connection mode. Value: Ad Hoc, Infrastructure NOTE Ad Hoc: Directly communicates with the device without going through an access point. This method cannot be used to connect to two or more devices. Infrastructure: Performs communication through an access point. Channel Set channel. Use [▲] or [▼] or the numeric keys to enter a number. Value: 1 to 11 Netwk Authentic. Select network authentication type. To select other options, open the device home page from a computer. Value: Open, Shared, WPA-PSK*1, WPA2-PSK*1 Encryption Select encryption settings. The setting values vary depending on the "Netwk Authentic." setting. Data Encryption Set the encryption method. When "Netwk Authentic." is set to [Open] or [Shared]: Value: Disable, WEP When "Netwk Authentic." is set to [WPA-PSK] or [WPA2-PSK]: Value: TKIP*2, AES, Auto*2 WEP Key Register the WEP key. Select [Edit] and Enter the WEP Key using the numeric keys. NOTE Preshared Key*3 Up to 26 characters can be entered. Character Entry Method (page 11-11) Register the Preshared Key. Select [Edit] and Enter the Preshared Key using the numeric keys. NOTE The number of characters is between 8 and 64. Character Entry Method (page 11-11) *1 Not displayed if you selected [Ad Hoc] for "Connection Mode". *2 Not displayed if you selected [WPA2-PSK] for "Netwk Authentic.". *3 Displayed if you selected [WPA-PSK] or [WPA2-PSK] for "Netwk Authentic.". 8-31