Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 69
Sleep Rules models for Europe, Sleep Level Energy Saver and Quick Recovery models except for Europe
View all Kyocera ECOSYS M6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Installing and Setting up the Machine > Energy Saver function 2 Set the Sleep time. 1 Enter the Sleep time. NOTE You can set any value between 1 and 240. Use the numeric keys or select the [▲] or [▼] key to enter a number. 2 Select the [OK] key. Sleep Rules (models for Europe) You can set whether sleep mode operates for each function. When the machine enters sleep mode, the ID card cannot be recognized. For more information on Sleep Rules settings, refer to the following: Sleep Rules (models for Europe) (page 8-18) Sleep Level (Energy Saver and Quick Recovery) (models except for Europe) For sleep level, you can toggle between the following two modes: Energy Saver mode and Quick Recovery mode. The default setting is Energy Saver mode. Energy Saver mode reduces power consumption even more than Quick Recovery mode, and allows Sleep Mode to be set separately for each function. The ID card cannot be recognized. NOTE If the optional Network Interface Kit is installed, this function will not be displayed. To resume, select the [Energy Saver] key on the operation panel. If print data is received during Sleep, the machine automatically wakes up and starts printing. For more information on Sleep Level settings, refer to the following: Sleep Level (models except for Europe) (page 8-18) Follow the steps below to select the sleep level and use Energy Saver mode for each function. 1 Display the screen. [System Menu/Counter] key key > [Common Settings] > [OK] key key > [Timer Setting] > [OK] key key > [Sleep Level] > [OK] key 2 Select the Sleep level key > [Quick Recovery] or [Energy Saver] > [OK] key When [Energy Saver] is set, next go on to set whether or not to use Energy Saver mode for each function. 3 Set the Sleep rule. 1 Select the function to be set, and select the [OK] key. [Card Reader] is displayed when the optional Card Authentication Kit is activated. [FAX] is displayed only on products with the fax function installed. 2 key > [Off] or [On] > [OK] key Repeat steps 3-1 to 3-2 to set for a different function. 2-21