Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 355
Display the correction menu, Adjust Magenta
View all Kyocera ECOSYS M6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 355 highlights
Troubleshooting > Troubleshooting 3 Display the correction menu key > [Adjust Magenta] > [OK] key The magenta correction menu appears. 4 Enter the appropriate value. 1 Find the location on each chart where 2 lines most closely match. If this is the 0 position, registration for that color is not required. For the illustration, B is the appropriate value. From charts H-1 to H-5, read the values from H-1 to H-5. From charts V-1 to V-5, read only the values from V-3 (center). 2 Select the [◄] or [►] key to change the H-1 to H-5 and V-3 items, select the [▲] or [▼] key to enter the values read from the chart, and select the [OK] key. Magenta correction is performed. After a brief interval, you will return to the advanced menu for color printing position correction. To increase the value from 0 up to a maximum of 9, select the [▲] key. To decrease the value, select the [▼] key. Select [▼] to change the value from 0 to an alphabetical letter. Continue selecting to change from A through l. To move in the opposite direction, select [▲]. You cannot use the numeric keys to enter these values. 3 Repeat steps 3 to 4 to correct cyan and yellow. 10-33