Kyocera ECOSYS M6030cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 65
Network Setup (LAN Cable Connection), Display the screen., Con the settings.
View all Kyocera ECOSYS M6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Installing and Setting up the Machine > Default Settings of the Machine Network Setup (LAN Cable Connection) The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms. Set up TCP/IP (IPv4) to connect to the Windows network. The default settings are "TCP/IP Protocol: On, DHCP: On, Auto-IP: On". NOTE If user login administration is enabled, you can only change the settings by logging in with administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter a login user name and password, and select [Login]. The factory default login user name and login password are set as shown below. Login User Name: 3000 Login Password: 3000 TCP/IP Settings IPv4 setting Set up TCP/IP (IPv4) to connect to the Windows network. NOTE Ask your network administrator for the IP address in advance, and have it ready when you configure this setting. In the following cases, set the IP address of DNS server on the Command Center RX. Setting the IP Address of the DNS Server, refer to the following: Command Center RX User Guide • When using the host name with "DHCP" setting set to "Off" • When using the DNS server with IP address that is not assigned by DHCP automatically. 1 Display the screen. [System Menu/Counter] key key > [System/Network] > [OK] key key > [Network Setting] > [OK] key key > [TCP/IP Settings] > [OK] key key > [IPv4 Setting] > [OK] key 2 Configure the settings. When setting the static IP address 1 key > [DHCP] > [OK] key key > [Off] > [OK] key 2 key > [IP Address] > [OK] key 3 Set the IP address. NOTE You can set any value between 000 and 255. Use the numeric keys or select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the position being entered, which is shown highlighted. 4 Select the [OK] key. 2-17