Kyocera TASKalfa 2550ci Fax System (W) Operation Guide - Page 52

FAX Operation (Basic) FAX Automatic Reception When using this machine as a FAX-dedicated machine that does not receive telephone calls, set the machine to FAX-dedicated reception. No special operation is required when receiving faxes. NOTE: When you are receiving DRD service from a telephone company, change the reception method to [Auto (DRD)]. For details, refer to DRD Reception (Available for inch versions only) on page 6-19. Reception Method This machine allows the following five reception methods. • Auto (Normal) • Auto (FAX/TEL) (Refer to page 6-7.) • Auto (TAD) (Refer to page 6-9.) • Auto (DRD) (Refer to page 6-19.) • Manual (Refer to page 4-15.) Checking and Changing the Reception Method 1 Press the System Menu key. 2 Press [FAX], [Next] of Reception, [Next] of FAX, and then [Change] of RX Setting. 3 Select [Auto (Normal)]. 4 Press [OK]. Reception Starts 1 When a fax has been sent to you, the machine rings the registered number of times, and then starts receiving the fax. After reception has started, the Processing indicator blinks. NOTE: You can change the number of times the ringing tone rings. (Refer to Rings on page 6-11.) To cancel the reception, refer to Cancelling Transmission (Disconnection of Communication) on page 3-15. Memory Reception When the machine cannot print a fax due to paper running out or a paper jams, it temporarily stores originals that have been sent in the image memory. When the machine returns to the printable state, printing starts. 3-12