Kyocera TASKalfa 2550ci Fax System (W) Operation Guide - Page 86
Using the Remote Switch Dial, reception starts.
View all Kyocera TASKalfa 2550ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
FAX Operation (Advanced) Using the Remote Switch Dial To start fax reception by operation from the connected telephone set, use the following operation. 1 The connected telephone set makes a ringing tone. 2 Lift the handset of the telephone. 3 When you hear the fax tone from the handset, enter the two-digit remote switch dial number using the dial button on the telephone set. NOTE: The remote switch dial is set to 55 at the factory. When entering the 2-digit remote switch dial number, press the numbers slowly. If the numbers are pressed too quickly, the line may not switch to the machine. 4 The telephone line switches to the machine, and reception starts. 4-18
FAX Operation (Advanced)
4-18
Using the Remote Switch Dial
To start fax reception by operation from the connected telephone set, use the following operation.
1
The connected telephone set makes a ringing tone.
2
Lift the handset of the telephone.
3
When you hear the fax tone from the handset, enter
the two-digit remote switch dial number using the
dial button on the telephone set.
4
The telephone line switches to the machine, and
reception starts.
NOTE:
The remote switch dial is set to 55 at the
factory.
When entering the 2-digit remote switch dial number,
press the numbers slowly. If the numbers are
pressed too quickly, the line may not switch to the
machine.