Lacie 131018 User Manual - Page 33
Getting a New IP Address
UPC - 093053789114
View all Lacie 131018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Embedded StorView Setup 3.1.3.1 Using Dynamic IP (DHCP) Note StorView does not display the TCP/IP information when Dynamic IP (DHCP) is selected. You must use a third-party network administration program to obtain this information. To use the DHCP Server network interface setting: 1 Click the option button next to Dynamic IP (DHCP). 2 Click the APPLY button to make the changes effective. 3 Click the CLOSE button. 3.1.3.2 Using Static IP To manually configure the network interface setting: 1 Click the option button next to Static IP. 2 Enter the desired IP address in the "IP Address" field and press the key or click in the Subnet Mask field. 3 Enter the desired Subnet Mask in the "Subnet Mask" field and press the key or click in the Default Gateway field. 4 Enter the desired gateway or router address and press the key or click in the DNS Server field. 5 Enter the desired DNS Server IP address. 6 Click the APPLY button to make the changes effective. 7 Click the CLOSE button. 3.1.4 Getting a New IP Address If you are set up to receive your IP address using Dynamic IP (DHCP), you can force the embedded StorView server to obtain a new IP address from your DHCP server. 1 Click the SETTINGS button and select the PREFERENCES tab. 2 Click the Renew check box. 3 Click the APPLY button to make the changes effective. 4 Click the CLOSE button. 25