Lantronix MPS100 EPS Reference Manual - Page 136
Set/Define Port Bitronics, Set/Define Port Character Size
View all Lantronix MPS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Set/Define Port Commands 12.24.2 Set/Define Port Bitronics Command Reference SET DEFINE PORT PortList ALL BITRONICS ENABLED DISABLED Controls bidirectional parallel port functionality. The attached printer must also support Bitronics. Applies To EPS1, EPS2, EPS2-100, EPS4-100, MPS1, MPS100, LPS1 Parameters PortList/All Specifies a particular port or group of ports, or all ports. Port numbers are specified with integers between 1 and the total number of physical ports. Lists of ports must be separated by commas. Ranges of ports must be separated by a dash (-). Note: In the absence of a PortList or the All parameter, the configuration will affect the current port only. Examples Local> DEFINE PORT 2 BITRONICS ENABLED See Also Bitronics Interface, page 10-1. 12.24.3 Set/Define Port Character Size SET DEFINE PORT PortList ALL CHARACTER [ SIZE 78 Sets the number of bits per character for the serial port. Character size defaults to 8 bits. Applies To EPS1, EPS2, EPS2-100, EPS4-100 Restrictions You must be the privileged user to change the character size of a port other than your own. Errors Autobaud will only work for 8 bits, or for 7 bits with Even parity. Parameters PortList/All Specifies a particular port or group of ports, or all ports. Port numbers are specified with integers between 1 and the total number of physical ports. Lists of ports must be separated by commas. Ranges of ports must be separated by a dash (-). Note: Examples In the absence of a PortList or the All parameter, the configuration will affect the current port only. Local> SET PORT CHARACTER SIZE 7 12-16