Lantronix MPS100 EPS Reference Manual - Page 183
Show/Monitor/List Ports
View all Lantronix MPS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Command Reference 12.31.3 Show/Monitor/List Ports Show/Monitor/List Commands SHOW MONITOR PORTS LIST ALL portnum CHARACTERISTICS COUNTERS STATUS SUMMARY Displays information about the Server's ports. The current port is the default, unless an optional port designation is specified. Applies To EPS1, EPS2, EPS2-100, EPS4-100, MPS1, MPS100, LPS1 Restrictions You must be the privileged user to use the Monitor Ports command. Secure users cannot Show or List ports other than their own. Errors If the port is a virtual port, irrelevant information such as baud rate, parity, and flow control will not be displayed. Any List on a virtual port will display template port configuration. Status and Counters parameters are not valid with List. Counters is also not valid for virtual ports. Parameters All Displays information about all ports. Access Displays information about all local ports having a particular access type. portnum Displays information about a specified port. Characteristics Displays the port's settings, such as baud rate, parity, preferred services, name, username, and group codes. Counters Displays the port's local and remote accesses, as well as the communication errors on the device. Status Displays the port's connection status: the number of sessions and information about the current connection. It also shows the current flow control state and the state of the DSR and DTR serial signals. Summary Displays the access type, offered services, and the login status of the port. 12-63