Lantronix MPS100 EPS Reference Manual - Page 147
Set/Define Printer Type
View all Lantronix MPS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Command Reference Set/Define Printer Type Dedicating a port will disable port verification. See Set/Define Port Dedicated on page -HIDDEN for more information. Applies To EPS2-100, EPS4-100 Restrictions You must be the privileged user to enter this command for a port other than your own (the current port). Parameters PortList/All Specifies a particular port or group of ports, or all ports. Port numbers are specified with integers between 1 and the total number of physical ports. Lists of ports must be separated by commas. Ranges of ports must be separated by a dash (-). Note: See Also In the absence of a PortList or the All parameter, the configuration will affect the current port only. Show/Monitor/List Ports, page 12-63; Other Port Characteristics, page 5-5; Port Messages, page -HIDDEN. 12.25 Set/Define Printer Type SET AUTO DEFINE PRINTER TYPE CENTRONICS DATAPRODUCTS Sets the printer type for the parallel port(s). Applies To EPS1, EPS2 Restrictions You must be the privileged user to use this command. Parameters Auto The Server will attempt to automatically select the printer type based on the signals seen on the parallel port. Centronics The parallel port is treated as a Centronics-compatible port. Dataproducts The parallel port is treated as a Dataproducts-compatible port. 12-27