Lantronix MPS100 EPS Reference Manual - Page 180
Set/Define Service SOJ, Set/Define Service TCPport
View all Lantronix MPS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Set/Define Service Commands 12.29.18 Set/Define Service SOJ Command Reference SET StartString DEFINE SERVICE ServiceName SOJ NONE Specifies a string to be sent to the attached device at the start of every access, regardless of network protocol. Applies To EPS1, EPS2, EPS2-100, EPS4-100, MPS1, MPS100, LPS1 Restrictions You must be the privileged user to use this command. Parameters StartString Any ASCII characters, or a backslash and two hex digits. None Clears any previously-configured string. Examples Local>> DEFINE SERVICE myserv SOJ \45 See Also Clear/Purge Service, page 12-3; Set/Define Service EOJ, page 12-55; Show/ Monitor/List Services, page 12-72. 12.29.19 Set/Define Service TCPport SET portnum DEFINE SERVICES ServiceName TCPPORT NONE Specifies a TCP listener socket for this service. TCP connections to the socket are accepted or rejected based on the availability of the service. Applies To EPS1, EPS2, EPS2-100, EPS4-100, MPS1, MPS100, LPS1 Restrictions You must be the privileged user to use this command. Parameters portnum Enter a socket number between 4000 and 4999. None Clears any previously-defined TCPport. No TCPPort is configured by default. Note: See Also Either a TCPport or a Telnetport may be configured for a service, but not both. Clear/Purge Service, page 12-3; Show/Monitor/List Services, page 12-72; TCP/Telnet Service Sockets, page 4-8. 12-60