Lantronix Spider Lantronix Spider / SpiderDuo - User Guide - Page 97
Configuration, Reset to Defaults, Reset, Maintenance > Config/Factory Defaults
View all Lantronix Spider manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
10: Maintenance 2. View or modify the following fields. Table 10-2 Device Status Settings Field Device Information Connected Users System Identifier USB Status Description Displays the product name, serial number, board ID, device IP address, device MAC address, firmware version, firmware build number, firmware description, hardware, and Kira chip revision. Displays the user name and IP address of the active connection. It also displays whether the user is connected to the Remote Console, and if so, whether exclusive access mode is activated. Check the box to turn the ID indicator on and off. Each Spider device has an orange LED that can be lit by remote control. By default the LED is off, and when you clear the checkbox, the LED gets turned on. Displays the USB speed, keyboard, mouse, and mass storage status. 3. Do one of the following: a. Click Save to save settings. b. Click Reset to Defaults to restore system defaults. c. Click Reset to restore original settings. Configuration In the Configuration page, you can specify the backup, preserve Network Basic settings, and restore the computer or Spider device configuration. To view the configuration parameters, perform the following steps. 1. Click Maintenance > Config/Factory Defaults. The following page displays. Spider™ and SpiderDuo® KVM-over-IP Device User Guide 97