Lantronix xPico xPico - Integration Guide - Page 11

xPico Features, xPico Wi-Fi Features

Get Lantronix xPico PDF manuals and user guides View all Lantronix xPico manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

2: Functional Description xPico Features The xPico device server contains Lantronix's own DSTni® EX controller, with 256 KBytes of SRAM, 16 KBytes of boot ROM, and integrated 10/100 PHY. The xPico also contains the following:  3.3-volt serial interface  8 Configurable I/O pins  All logic level I/O pins are 5V input tolerant  4-Mbit flash memory  Power supply filters  Reset circuit  +1.8V regulator Note: xPico embedded device server does not contain integrated Ethernet magnetics. An external Ethernet magnetic module and RJ45 Jack is required to interface to a standard 10/100Mbps Ethernet network. The xPico requires +3.3-volt power and is designed to operate in an extended temperature range (see technical data). xPico Wi-Fi Features The xPico Wi-Fi device server contains Cortex M3 ARM processor with 128KByte of SRAM and 1MByte of embedded Flash memory. The unit also includes an 802.11 b/g/n WLAN radio with a U.FL port for connection to an external antenna. The xPico Wi-Fi embedded device server also contains the following:  3.3-volt serial interface  8 Configurable I/O pins  All logic level I/O pins are 5V input tolerant  8-Mbit flash memory (in addition to the 1MByte CPU embedded Flash)  Power supply filters  Reset circuit Note: xPico Wi-Fi units do not contain an integrated antenna. An external antenna is required for connection to a WLAN network. The xPico Wi-Fi embedded device server requires +3.3-volt power and is designed to operate in an extended temperature range (see technical data). xPico® Embedded Device Server Integration Guide 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
2: Functional Description
xPico Features
The xPico device server contains Lantronix’s own DSTni® EX controller, with 256 KBytes
of SRAM, 16 KBytes of boot ROM, and integrated 10/100 PHY.
The xPico also contains the following:
3.3-volt serial interface
8 Configurable I/O pins
All logic level I/O pins are 5V input tolerant
4-Mbit flash memory
Power supply filters
Reset circuit
+1.8V regulator
Note:
xPico embedded device server does not contain integrated Ethernet
magnetics.
An external Ethernet magnetic module and RJ45 Jack is required to
interface to a standard 10/100Mbps Ethernet network.
The xPico requires +3.3-volt power and is designed to operate in an extended
temperature range (see technical data).
xPico Wi-Fi Features
The xPico Wi-Fi device server contains Cortex M3 ARM processor with 128KByte of
SRAM and 1MByte of embedded Flash memory.
The unit also includes an 802.11 b/g/n
WLAN radio with a U.FL port for connection to an external antenna.
The xPico Wi-Fi embedded device server also contains the following:
3.3-volt serial interface
8 Configurable I/O pins
All logic level I/O pins are 5V input tolerant
8-Mbit flash memory (in addition to the 1MByte CPU embedded Flash)
Power supply filters
Reset circuit
Note:
xPico Wi-Fi units do not contain an integrated antenna.
An external
antenna is required for connection to a WLAN network.
The xPico Wi-Fi embedded device server requires +3.3-volt power and is designed to
operate in an extended temperature range (see technical data).
xPico® Embedded Device Server Integration Guide
11