Lenovo H520g Lenovo H520g Hardware Maintenance Manual - Page 38
Accessing Control Panel on the Windows 8 operating system, Troubleshooting procedure, Settings - desktop
View all Lenovo H520g manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Symptom The operating system does not start. The computer beeps multiple times before the operating system starts. Action Verify that: • The startup sequence includes the device where the operating system resides. Usually, the operating system is on the hard disk drive. For more information, see "Selecting a startup device" on page 55. Verify that no keys are stuck. Accessing Control Panel on the Windows 8 operating system On the Windows operating system, you can view and change computer settings through Control Panel. To access Control Panel on the Windows 8 operating system, do one of the following: • From the desktop 1. Move the cursor to the top-right or bottom-right corner of the screen to display the charms. 2. Click Settings. 3. Click Control Panel. • From the Start screen 1. Move the cursor to the top-right or bottom-right corner of the screen to display the charms. 2. Click Search. 3. On the Apps screen, scroll to the right side, and click Control Panel in the Windows System section. Troubleshooting procedure Use the following procedure as a starting point for diagnosing problems you are experiencing with your computer: 1. Verify that the cables for all attached devices are connected correctly and securely. 2. Verify that all attached devices that require ac power are connected to properly grounded, functioning electrical outlets. 3. Verify that all attached devices are enabled in the BIOS settings of your computer. For more information about accessing and changing the BIOS settings, refer to your Chapter 6 "Using the Setup Utility program" on page 53. 4. Go to the "Troubleshooting" on page 35 and follow the instructions for the type of problem you are experiencing. If the Troubleshooting information does not help you resolve a problem, continue with the next step. 5. Try using a previously captured configuration to see if a recent change to hardware or software settings has caused a problem. Before restoring a previous configuration, capture your current configuration in case the older configuration settings do not solve the problem or have adverse affects. To restore a captured configuration, do the following: • For Windows 7: Click Start ➙ Control Panel ➙ System and Security ➙ System ➙ System Protection ➙ System Restore. • For Windows 8: Open Control Panel, and then click System and Security ➙ System ➙ System Protection ➙ System Restore. If this does not correct the problem, continue with the next step. 6. Run the diagnostic program. See "Lenovo Solution Center" on page 51 for more information. • If the diagnostic program detects a hardware failure, contact the Lenovo Customer Support Center. See "Lenovo Support Web site" on page 30 for more information. 34 Lenovo H520gHardware Maintenance Manual