Lenovo Ispirati 2001 User's Guide - Ispirati 2001 (6300) (English) - Page 28

Chapter 3: Motherboard Connectors 3-3 CPU (Packaging) Celeron (FCPGA) Celeron (PPGA) Speed 550E MHz 533EB MHz 500E MHz 733 MHz 600 MHz 566 MHz 533A MHz 500A MHz 533 MHz 500 MHz 466 MHz 433 MHz 400 MHz 366 MHz FSB 100 MHz 133 MHz 100 MHz 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz L2 Cache 256 KB 256 KB 256 KB 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB &"Fan Header (CPUFAN) CPUFAN is connected to CPU fan. This becomes active when system's power is turned on. &"Power Supply Connector (JWR1) When used with an ATX-compliant power supply that supports remote power on/off, the motherboard can turn off system power through software control. To enable soft-off control in software, advanced power management must be enabled in BIOS Setup and in the operating system. With soft-off enabled, when power resumed after a power interruption caused by a power outage or a disconnected power cord, the computer returns to the power state it was in before power was interrupted. &"Memory Banks (DIMM's) Two memory banks are provided via 2 168-pin (unbuffered) DIMMs (Double In-line Memory Modules). At least one memory bank must be populated. Only 3.3v DIMM's are supported.