Lenovo Ispirati 2001 User's Guide - Ispirati 2001 (6300) (English) - Page 41

4-10 Chapter 4: BIOS Setup Item IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO IDE Primary Master UDMA IDE Primary Slave UDMA IDE Secondary Master UDMA IDE Secondary Slave UDMA USB Controller USB Keyboard Support Init Display First Options Auto Mode0 Mode1 Mode2 Mode3 Mode4 Auto Disable Enabled Disabled Enabled Disabled PCI Slot Onboard AC97 Audio AC97 Modem IDE HDD Block Mode Auto Disabled Enabled Disabled Onboard FDD Controller Onboard Serial Port 1 Onboard Parallel Port Onboard Parallel Mode Disabled Enabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled Auto Disabled 3BC/IRQ7 278/IRQ5 378/IRQ7 Normal EPP ECP ECP/EPP EPP Mode Select ECP Mode Use DMA EPP 1.7 EPP 1.9 1 3 Description Sets the mode of PIO and UDMA. If 'On-Chip Primary PCI IDE' is disabled, Primary devices (Primary Master PIO/UDMA, Primary Slave PIO/UDMA are disabled and cannot be modified. If 'On-Chip Secondary PCI IDE' is disabled, Secondary devices (Secondary Master PIO/UDMA, Secondary Slave PIO/UDMA) are disabled and cannot be modified. Enables or disables USB drive controller. Enables or disables USB keyboard if 'USB Controller' is enabled. Determines where initial display signals are derived from, PCI slot or onboard VGA. Enables or disables these features. If IDE hard drive supports block mode, select 'Enabled' for automatic detection of the optimal number of block reads/writes per sector that the hard drive can support. Enables the floppy drive controller on the motherboard. Specifies the base I/O port address and interrupt signal of serial port. Sets the base I/O port address and interrupt signal for parallel port. Selects mode of parallel port if 'Onboard Parallel Port' is not disabled. 'Normal' ' normal parallel mode 'EPP' ' Enhanced Parallel Port 'ECP' ' Extended Capabilities Port Selects type of EPP parallel mode. Selects DMA channel for ECP parallel port mode.