Lenovo PC 300PL Installing Options in your PC300PL - 6562 - Page 45

See Removing the Side

Page 45 highlights

4 Install the adapter into the appropriate slot on the riser card. Except for adapters installed on the single-slot side, the components of a PCI adapter face down toward the system board and the components of an ISA adapter face up. If a component in the computer or on the adapter interferes with the installation, use another slot. If you are installing a full-sized ISA adapter in the bottom expansion slot, you must remove the side cover and the system board. See "Removing the Side Cover" on page 32 and "Installing a Full-Sized ISA Adapter" on page 33. Riser Card Adapter Card 5 Go to the device-record form in Using Your Personal Computer, and write the adapter name next to the slot into which you installed it. If you removed the side cover, see "Replacing the Side Cover" on page 36. What to do next To work with another option, go to the appropriate section. To complete the installation, go to Chapter 6, "Completing the Installation" on page 66. Chapter 4. Working with Adapters and Internal Drives 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

4
Install the adapter into the appropriate slot on the riser card.
Except for
adapters installed on the single-slot side, the components of a PCI adapter face
down toward the system board and the components of an ISA adapter face
up.
If a component in the computer or on the adapter interferes with the
installation, use another slot.
If you are installing a full-sized ISA adapter in the bottom expansion slot, you
must remove the side cover and the system board.
See “Removing the Side
Cover” on page
32 and “Installing a Full-Sized ISA Adapter” on page
33.
Adapter Card
Riser Card
5
Go to the device-record form in
Using Your Personal Computer
, and write the
adapter name next to the slot into which you installed it.
If you removed the side cover, see “Replacing the Side Cover” on page
36.
What to do next
±
To work with another option, go to the appropriate section.
±
To complete the installation, go to Chapter
6, “Completing the Installation”
on page
66.
Chapter
4.
Working with Adapters and Internal Drives
31