Lenovo ThinkCentre M80 Hardware Maintenance Manual for ThinkCentre M80 - Page 60
PCI Card Test Passed, PCI Card Failure
View all Lenovo ThinkCentre M80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Diagnostic Error Code FRU/Action 015-196-XXX USB port test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Re-start the test to reset the log file. 015-197-XXX USB port test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 39. 2. Re-run test 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 015-198-XXX USB port test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 39. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Go to "Undetermined problems" on page 64. 015-199-XXX USB port test failed, cause unknown 1. Go to "Undetermined problems" on page 64. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Replace component under function test. 018-000-XXX PCI Card Test Passed No action 018-0XX-XXX PCI Card Failure 1. Riser card, if installed 2. System board 018-195-XXX PCI Card Test aborted by user 1. PCI card 2. Information only Re-start the test, if necessary. 018-196-XXX PCI Card test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Re-start the test to reset the log file. 018-197-XXX PCI Card test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 39. 2. Re-run test 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 018-198-XXX PCI Card test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 39. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Go to "Undetermined problems" on page 64. 018-199-XXX PCI Card test failed, cause unknown 1. Go to "Undetermined problems" on page 64. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Replace component under function test. 52 ThinkCentre Hardware Maintenance Manual