Lenovo ThinkCentre M80 Hardware Maintenance Manual for ThinkCentre M80 - Page 62
X-XXX 025-03X-XXX 025-04X-XXX, 03X-XXX 030-04X-XXX
View all Lenovo ThinkCentre M80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Diagnostic Error Code 025-02X-XXX 025-03X-XXX 025-04X-XXX IDE Interface failure 025-195-XXX IDE interface Test aborted by user 025-196-XXX IDE interface test halt, error threshold exceeded 025-197-XXX IDE interface test warning 025-198-XXX IDE interface test aborted 025-199-XXX IDE interface test failed, cause unknown 030-000-XXX SCSI interface Test Passed 030-00X-XXX 030-01X-XXX SCSI interface failure 030-027-XXX SCSI interface Configuration/Setup error 030-03X-XXX 030-04X-XXX SCSI interface error 030-195-XXX SCSI interface Test aborted by user FRU/Action 1. IDE signal cable 2. Check power supply 3. Reseat IDE signal cable 4. IDE device 5. System board Information onlyRe-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 39. 2. Re-run test 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 39. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Go to "Undetermined problems" on page 64. 1. Go to "Undetermined problems" on page 64. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Replace component under function test. No action 1. SCSI signal cable 2. Check power supply 3. SCSI device 4. SCSI adapter card, if installed. 5. System board 1. SCSI signal cable 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. SCSI device 4. SCSI adapter card, if installed. 5. System board 1. SCSI signal cable 2. Check power supply 3. SCSI device 4. SCSI adapter card, if installed. 5. System board Information only Re-start the test, if necessary. 54 ThinkCentre Hardware Maintenance Manual