Lenovo ThinkCentre M80 Hardware Maintenance Manual for ThinkCentre M80 - Page 61
IDE interface Test Passed
View all Lenovo ThinkCentre M80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Diagnostic Error Code 018-250-XXX PCI Card Services error 020-000-XXX PCI Interface Test Passed 020-0XX-XXX PCI Interface error 020-195-XXX PCI Test aborted by user 020-196-XXX PCI test halt, error threshold exceeded 020-197-XXX PCI test warning 020-198-XXX PCI test aborted 020-199-XXX PCI test failed, cause unknown 020-262-XXXPCI system error 025-000-XXXIDE interface Test Passed 025-00X-XXX 025-01X-XXX IDE interface failure 025-027-XXX IDE interface Configuration/Setup error FRU/Action 1. PCI card 2. Riser card, if installed 3. System board No action 1. PCI card 2. Riser card, if installed 3. System board Information only Re-start the test, if necessary. 1. Press F3 to review the log file. 2. Re-start the test to reset the log file. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 39. 2. Re-run test 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 39. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Go to "Undetermined problems" on page 64. 1. Go to "Undetermined problems" on page 64. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Replace component under function test. 1. PCI card 2. Riser card, if installed 3. System board No action 1. IDE signal cable 2. Check power supply voltages 3. Reseat IDE signal cable 4. IDE device 5. System board 1. IDE signal cable 2. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 261. 3. Reseat IDE signal cable 4. IDE device 5. System board Chapter 7. Symptom-to-FRU index 53